Manual strap tensioner

Manual strap tensioner

Manual strap tensioner ensure the correct pretensioning force, which is an indispensable prerequisite for ensuring the load in accordance with regulations and to avoid the risk of slipping during transport.

EasyLash Load systems

all the benefits at a glance

    • Pre-tensioning and cutting into a machine

In order to achieve the required prestressing forces, we need a reliable pocket-drive. In the case of the normal struts, the pretensioner is integrated into the device and is therefore quite valuable to be shipped with the load. In the case of EasyLash systems, the pre-tensioning mechanism stays in the sender and only the strap moves along with the load. This is an investment once it quickly dampens.

    • Take the tension over you

With the EasyLash Ergo dynamic load system you pull, instead of pushing, to tension the strap more ergonomically. Tensioning requires less effort and completes faster. Ergo is a good alternative to the standard pre-tensioner (D000152) and is ideal if you use it only occasionally. It can be used with all EasyLashtex straps.

    • Pneumatic pretensioner

Instead of using muscle strength, this tensioning system makes it easier for us to operate with compressed air. in this way we save energy and time, especially when packing large quantities often. And in this system the cutter is embedded – there is no faster and safer solution than this. This mechanism is suitable for up to 38mm buckles.

    • Manual pre-tensioning system

This system made of durable material makes load insurance easy and fast. Pre-tension percentage per motion is large and so we achieve high pre-tension with little effort. Depending on the model, it is suitable for a 19, 40 or 50mm strap.

Manucord

The professional high-performance manual tensioner up to 25 mm width

  • Easy to use, very robust
  • Designed for professional use
  • Maximum tensioning capability allowed
  • Suitable for all commercial available textile straps and buckles
  • Optional accessory for bundling of packages with irregular or absent contact face

Due to its construction and its robustness the manual tensioner ensures a maximum tensioning capability with all kind of textile straps and suitable buckles which is far above market benchmarks.

ManuCord allows optimum securing even with heaviest goods and thus it is suitable for professional use; also under heavy-duty conditions.

In addition, the optional available accessory for round bundling also allows in a simple way to strap quickly and reliably packages which have no or only very small contact face.

Manucord XL

The manual tensioner for textile strap up to 50mm widths

  • Very rugged design for the professional application
  • Low weight of only 3.0 kg and thus easy handling
  • Allows maximum tensioning
  • Suitable for textile, woven and composite strap up to 50 mm (2 “) widths

The manual tensioner ManuCord XL is the consistent further developement of the model ManuCord. It is an adequate altenative for professional processing of textile strap, woven strap and composite strap up to 50 mm width.

On account of its construction and robustness the manual tensioner allows a maximum tensioning and grants over here optimum lashing and securing.

Pneumocord

The pneumatic tensioner for all textile straps up to 32 mm width

  • Easiest handling, light weight
  • Rugged construction designed for continuous use
  • High tensioning capacity of max. 7.500 N; tensioning power is controlled by pre-selection of operating pressure
  • Integrated cutting unit
  • Optional accessories available (hanger bow, handshield bow)

PneumoCord allows effective and quick securing of goods with corded, composite and woven straps and buckles.

Due to the build-in cutter when using wire buckles it can be worked without firstly crosscut the strap.

For vertical as well as horizontal working on a balancer there is optional available a hanger bow. The handshield bow minimizes the injury risks when lashing.

Pneumocord RV

The pneumatic tensioner for all textile straps up to 32 mm width

  • Easiest handling, light weight
  • Rugged construction designed for continuous use
  • High tensioning capacity of max. 7.500 N; tensioning power is controlled by pre-selection of operating pressure
  • Integrated cutting unit
  • Optional accessories available (hanger bow, handshield bow)

PneumoCord allows effective and quick securing of goods with corded, composite and woven straps and buckles.

The version RV has a left / right turn tensioning unit. Thus greatest ways of tensioning are also manageable for example, if the strap can not be pre-tensioned around the good by hand. Also the cutting and release operation can be accomplished with less effort. Due to the build-in cutter when using wire buckles it can be worked without firstly crosscut the strap.

For vertical as well as horizontal working on a balancer there is optional available a hanger bow. The round bundler (for version RV) enables a quick and reliable way of securing goods with none or only a very small contact face.

Pneumolash

The pneumatic tensioner for load securing strap

  • Very rugged design for professional application
  • Low weight, only 4,5 kg und thus easy handling
  • High tensioning power, max 7.500 N
  • Always constant tensioning by prefix of the working pressure
  • Suitable for load securing strap up to 50 mm (2”) widths

By its high performance and very easy handling the pneumatic tensioner PneumoLash guarantees the optimum pretension of one-way lashing up to 50mm widths.

Its construction and robustness allows best securing of goods e.g. in boxes and containers, as well as on flats and wagons.

The pneumatic tensioner PneumoLash also works very reliable under difficult working conditions and allows always best economy.